SIDCPHIL 0 Posted April 3, 2008 Has anybody fitted these I can't seem to make mine fit Share this post Link to post Share on other sites
BossHogg 0 Posted April 3, 2008 I was going to say before i saw those pic that a little work with the grinder might be in order, as i had to open out a couple of holes to fit my solid mounts for my sparco's. After seeing those pics i would really double check they sent the right sub frames as they look miles out. Share this post Link to post Share on other sites
GTI6BOY 29 Posted April 3, 2008 take the runners off mate and fit the front and rear bars first theres nout wrong with them Share this post Link to post Share on other sites
SIDCPHIL 0 Posted April 3, 2008 take the runners off mate and fit the front and rear bars first theres nout wrong with them Ok I will give it a go Share this post Link to post Share on other sites
SIDCPHIL 0 Posted April 4, 2008 Got my mechanic coming round Saturday to have a look as I am totally mystified Share this post Link to post Share on other sites
GTI6BOY 29 Posted April 4, 2008 did you do what i said??? Share this post Link to post Share on other sites
SIDCPHIL 0 Posted April 5, 2008 Hangs head in shame They were labelled up the wrong way round and the left was for the right and vice versa My 14 year old spotted it !! Share this post Link to post Share on other sites
MrG 3 Posted April 6, 2008 LOL!! when they are in bits and without instructions (mine were missing) they can be mystifying! Share this post Link to post Share on other sites
SIDCPHIL 0 Posted April 6, 2008 LOL!! when they are in bits and without instructions (mine were missing) they can be mystifying! Amen to that Share this post Link to post Share on other sites
AdamP 0 Posted April 6, 2008 Hangs head in shame They were labelled up the wrong way round and the left was for the right and vice versa My 14 year old spotted it !! I usually find it's the other way round! I'll stand there stumped with my dad stood looking and sniggering, followed by 'you might want to try....'! Share this post Link to post Share on other sites
Guest Maikel205 Posted April 13, 2008 Are you going to mount a rollcage in your car too? I want to mount my seats like you do, but I'm afraid the seats are going to be too high in comb. with a cage. Share this post Link to post Share on other sites
boldy205 75 Posted April 13, 2008 The lowest cheapst way i found was 5 door runners which have no tilt mechanism, so lowwer, and fit direct to a 3 door shell, with thich 5mm ish steel plate running left to right of runners to bolt the frame to seat. Runners cost £5 for a pair, steel prob wont be much either. Job Jobed! Share this post Link to post Share on other sites
