yorkshirekowboy 19 1 Cars Posted April 1, 2008 as above, seen one for 125 quid, think thats a bit mad for the money, so juts wanting to know if anybody made one using the existing mi16 alloy finned sump. thanks danny Share this post Link to post Share on other sites
sutol 0 Posted April 1, 2008 (edited) Made these for a 1.9 You could do it in ally and bolt it in Edited April 1, 2008 by sutol Share this post Link to post Share on other sites
yorkshirekowboy 19 1 Cars Posted April 1, 2008 Made these for a 1.9 You could do it in ally and bolt it in sweet, so bolting it on would mean drilling it from the bottom in the alloy... does it work well? Share this post Link to post Share on other sites
sutol 0 Posted April 1, 2008 I had an idea of putting tabs on the ally baffle plate and bolting it in to save welding. I dont know how effective the single baffle is on track but it does hold the oil close to the pick up for longer. Mine will be tried by a friend in his 1.9 shortly so we shall see Share this post Link to post Share on other sites
yorkshirekowboy 19 1 Cars Posted April 1, 2008 found this pic ace mate cheers, are the lines/fin's in the bottom of the sump already there? Share this post Link to post Share on other sites
