taylorspug 7 Posted March 28, 2008 Anyone know the thread size/pitch for GTI trackrod ends by any chance? Saves me having to find one and measure... Share this post Link to post Share on other sites
Tom Fenton 1,541 Posted March 28, 2008 Do you mean the threaded part into the steering rack, or the thread for the nut on the top of the balljoint? The balljoint thread will either be 10x1 if it is a standard Peugeot track rod end, or a choice between 10x1 and standard M10 (10x1.5) if it is an aftermarket one. Share this post Link to post Share on other sites
welshpug 1,657 Posted March 28, 2008 The nut is actually bang on in between the two sizes Tom said, M10x1.25 not sure what the rod itself is though. Share this post Link to post Share on other sites
taylorspug 7 Posted March 28, 2008 Sorry should have made that more clear, i mean the threaded part into the rack end. Share this post Link to post Share on other sites
Tom Fenton 1,541 Posted March 28, 2008 Well you say that WP, but I have 2 205's here, one with 10x1, and one with M10x1.5 track rod ends...... Share this post Link to post Share on other sites
welshpug 1,657 Posted March 28, 2008 they cant be pug original then if you ask pug for replacement Nyloc they'll give you M10x1.25. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 29, 2008 I think the track control end is 14x1, IIRC, right bugger to get hold of, I had to have my rose joints custom made to fit because no-one did any. Share this post Link to post Share on other sites
taylorspug 7 Posted March 29, 2008 Rippthrough, thankyou very much. Yes that does seem like an odd size, may get on my mates lathe and cut some myself if they are a git to get. Im doing some RJs too. Share this post Link to post Share on other sites
