whizzer71 0 Posted March 27, 2008 (edited) As per the title take a look at the pic,where can I get one like that,have seen the ones on ebay that say they take the oil pressure switch from the early alloy engine but havn't seen one for the later M16 x 1.5 thread,that said I think this one looks like it takes the earlier switch also ? Cheers Edited March 27, 2008 by whizzer71 Share this post Link to post Share on other sites
whizzer71 0 Posted March 27, 2008 Hey I just realised I think thats possibly a modded modine bolt ?,any input guys ??? Share this post Link to post Share on other sites
fletch 0 Posted March 27, 2008 Could try Merlin Motorsport... Share this post Link to post Share on other sites
Edp 67 3 Cars Posted March 27, 2008 I got mine from Demon Tweeks, this means you can run a standard 205 sender and also a decent mocal or similar pressure sender. LMA054/M Oil gauge T piece M16 x 1.5 to M10 X 1 £5.92 LMA101 M16 X 1.5 Male TO 1/8BSP Male £5.20 Cone fitting to pipe http://img.photobucket.com/albums/v331/ewP...OILPRESSURE.jpg Share this post Link to post Share on other sites
craig f90 0 Posted March 27, 2008 (edited) try matt lewis racing on ebay. i got one last week. i arrived in 2 days. item number = 150229279846. or theres a link rob turbo set up in my turbo oil gauges questions in this part of the forum. Edited March 27, 2008 by craig f90 Share this post Link to post Share on other sites
VisaGTi16v 1 Posted March 27, 2008 Matt Lewis was where I got mine from and also a standalone adjustable switch which actually works unlike the useless slow standard ones, I rigged it up to a side repeater in the middle of my dash so its 'kin bright when its on! Share this post Link to post Share on other sites
whizzer71 0 Posted March 27, 2008 Cheers guys my thanks to all ! Share this post Link to post Share on other sites
