colti 5 Posted March 25, 2008 Hello Guys. Have done away with the water/oil cooler on my RGY 205 2.0t.(Fitting aftermarket kit) Therefore i need a top hose minus the coolant outlets to the cooler.Have tried an early 1.9 hose but the angles are wrong at the rad and the stat housing(which at 40mm is to large for the hose). The original hose is stamped 1991. Share this post Link to post Share on other sites
rapidmi 4 Posted March 25, 2008 measure it up, inside diameter, angles etc and get samco to make you one, it wont be expensive Share this post Link to post Share on other sites
craig f90 0 Posted March 27, 2008 samco do new flexi hose. you can bend it to where you like. You can get them in different bores through demon tweeks. Share this post Link to post Share on other sites
whizzer71 0 Posted March 28, 2008 Thats a bit strange,I normally use the top hose for a car with a remote cooler (Ie 1.9 Gti 91> less pas) this usually fits straight on never had an issue before ?? Share this post Link to post Share on other sites
