Making Your Own Pedal Box Doable ?

[arnold naber 2]

Hi,

 

I'm currently working on my 1.3 rallye. I saw some pedalboxes in rallyes and they dont seem to hard to make..

I cant find a how to on the forum ? is there someone who has done this ?

 

I have currently 307 front brakes an a standard rear axel. That is going to be replaced with a disc rearbeam in the winter. What mastercylinders could i use for the front and rear ?

 

Arnold

[yorkdave 1]

i made one in my dad's shed with just basic hand tolls, a drill and a welder. i got the bias bar from demon tweeks and some master cylinders from my local motor factor. mine has been on for 2 years and done the ring twice and loads of track days in the uk, i will try and find some pics

[arnold naber 2]

i made one in my dad's shed with just basic hand tolls, a drill and a welder. i got the bias bar from demon tweeks and some master cylinders from my local motor factor. mine has been on for 2 years and done the ring twice and loads of track days in the uk, i will try and find some pics

 

Ah pics would be great

[yorkdave 1]

http://i42.photobucket.com/albums/e306/yorkdave/df9a8487.jpg

http://i42.photobucket.com/albums/e306/yor...unberbonnet.jpg

[arnold naber 2]

Thanks,

 

do you have a link or a productnumber of the bias bar? cant find it on their site

[base-1 17]

http://www.demon-tweeks.co.uk/products/Pro...amp;tlgrp=MS002

[Chris H 10]

MW motorsport do 205 pegal boxes for £70 exchange and they are a really nice bit of kit. That price is for the std pedal box modified and the bias bar fitted, you need to add your master cyls and a dash adjuster as well but its not worth the effort to make your own in my opinion. I made my own but after a few issues i decided to get the MW one and i was very happy.

 

www.mwmotorsport.co.uk

[yorkdave 1]

i would make my own again, just for the sense of achievment. but if i did it again i wouldn't use the demon tweeks set up and would use a rose joint and some threaded bar. its really not difficult, i'm a thicko fork lift engineer and i managed it!!