madant_uk 0 Posted March 2, 2008 (edited) Basically i have had my project car going for ages and realy struggling with connecting the wires up.I bought this shell from Dixon (not sure if he is on here or not!):He had a gti6 lump fitted and i have fitted my s16 into the bay, but the wiring loom on my engine i left attached to the engine, but Dixon removed his engine loom from the engine so it is stil inside the car i need to work out which connection goes where and if i have anything wrong etc i have taken plenty of photos of all the different connecgtion blocks from both my loom and his, i hope someone could help me, as i want to do this myself rather than taking it somewere to be ripped off, thanksMy connections: BROWN long wires as if the reach the otehr side around the drivers area maybe ignition? BROWNfive pin plug? BROWNsix pin plug? (has two black and two orange wires in either end) BROWNfive pin plug? (middle wires there is a light blue and a grey wire in the connection, also two brown wires in the forth port) WHITE five pin plug? BROWN three pin plug? BLUE three pin plug? (first port has a grey and ligh yellow wire, second port has a grey and yellow wires) WHITE four pin plug? Edited March 2, 2008 by madant_uk Share this post Link to post Share on other sites
madant_uk 0 Posted March 2, 2008 The rest of the pictuers can be found on here: http://s5.photobucket.com/albums/y163/madant_uk/ Thanks Dan Share this post Link to post Share on other sites
Coonper 0 Posted March 2, 2008 Looks like a nightmare! Good luck! Share this post Link to post Share on other sites
large 33 Posted March 6, 2008 Have you done a search as i know something like this was up not so lone ago. Share this post Link to post Share on other sites
