205 Gti-6 Speedo Cable

[All Praise The GTI 3]

well when i took the 6 for a test spin noticed the speedo not working,think its because it got near the exhaust(its very close.)

just wanting to know if 309 gti ones are longer?

i read to use a 405 one but which 405?

thanks

[Alastairh 47]

Are you sure its clicked in properly, its not pulled out the back of the speedo and you've got the plastic cog in the drive unit?

 

Mine on my sorrento looks rusty as fook with no insulation (mainly because its had various 16v engines installed), but still is a really steady needle!

 

Al

[All Praise The GTI 3]

not sure to be honest will have to check.

but its really close to the exhaust its just too short so i want a longer one so can re-route it better.

took for another quick spin earlier,reved to 5k this time, made the mi feel slow!

[Bakes100 20 1 Cars]

mine melted against the '6 manifold and completely broke into two peices, i brought a new standard 205 one and wrapped it in a peice of thin heat resistant hose and its solved the problem. hope this helps

[Spiky 37]

cable tied mine to the bulk head, it's fine like that

[shooter mcgavin 37]

any pics of how this is routed cause i cant see a way of doing it without it touching the zost

[Spiky 37]

the normal 205 way, but just cable tied against the bulkhead, works fine

[Bakes100 20 1 Cars]

if you havent got the heatshield bolted to the back of the head you can cable tie it to there

[All Praise The GTI 3]

solved this today,rang partco and they do two different ones. one is 900mm and the other 1150 or something like that. obviously got the longer one and its perfect

[shooter mcgavin 37]

you got a part number there fella

[All Praise The GTI 3]

got the packageing in the car so ill post the part no. up tomorrow after work

[All Praise The GTI 3]

numbers on packet are as follows:

FKS2030

A106C

speedo cable citroen peugeot

QSC3132

 

one of them should be it!