[trackday_prep] Dutch Trackday 205 Rallye 1.3

[Francesco 2 1 Cars]

The lights in the front spoiler are gonna be replaced by the original Rallye air inlets and the mirrors are also gonna be replaced by black one's.

[arnold naber 2]

haven't updated here for a while...so:

 

first off all i found these lights:

 

nicest off all was that i found them new in the original box

 

Then we found out the rubbers between the carbs and the intake were not ok..newones were € 450 !!!

 

So i made them from steel... so i van use the normal weber rubbers a €1,-per peice

 

 

 

Then inpassed the MOT /me happy

 

here it is next ot my girls 106 rallye...all we need now is a 306 rallye (306gti6 is allready bought and it will be rebuild )

http://www.kiekies.nl/zooi/IMAGE_017.jpg

 

 

 

 

The polyester hatch will arive here next week same as the polycarb window kit...with sliders..

 

Here some pictures of the engine bay.. still with the original rubbers..they are complete around kitted..will be replaced after i have made some miles on it

 

http://www.kiekies.nl/zooi/IMAGE_018.jpg

http://www.kiekies.nl/zooi/IMAGE_019.jpg

 

Then i drove it to the garage..took the hood and the hatch of..will be replaced with polyester ones

[arnold naber 2]

Another update:

 

poly bonnet

 

http://www.kiekies.nl/zooi/IMAGE_022.jpg

 

Original is 13 Kg

this one 4Kg ! + 600grams for the aerocatch

 

Then we unleashed the dremel on the bonnet

http://www.kiekies.nl/zooi/IMAGE_025.jpg

http://www.kiekies.nl/zooi/IMAGE_026.jpg

http://www.kiekies.nl/zooi/IMAGE_028.jpg

http://www.kiekies.nl/zooi/IMAGE_029.jpg

 

and the new poly carb windows

 

http://www.kiekies.nl/zooi/IMAGE_046.jpg

http://www.kiekies.nl/zooi/IMAGE_047.jpg

 

Poly rearhatch is also fitted... aerocatch would be a thight fit there so im going to use different bonnetpins..

 

This weekend i'll strip the doors + the dashboard.. and prepping it for the cage

[arnold naber 2]

Well its been a while but another update

 

weight list

 

Part								 orginal							new weight
Hood								   13 Kg								  4 kg
Doorwindows						 3 Kg								  1 Kg
rearwindows					  1.5 Kg								 1 Kg
hatch								17 Kg								  7 Kg

total savings														  24 Kg

 

I bought some new rallye arches.. normal + 1" width

 

http://www.kiekies.nl/zooi/IMG_0016.JPG

http://www.kiekies.nl/zooi/IMG_0017.JPG

 

And some new frontwings with integrated rallye arches + 1"

 

 

Tomorrw gonna strip the dashboard down.

take out the front window and tuesday the rollcage will be fitted

[jonnygoodhand 0]

Looking good Arnold! Especially like the front arches. Are they the same as the ones you supplied me, just with an extra inch of width?

[arnold naber 2]

Looking good Arnold! Especially like the front arches. Are they the same as the ones you supplied me, just with an extra inch of width?

 

Hi, Yes these are the same ones with an extra inch added. But these now have a closed peice on the door side.. yours dont had that i thought..

[arnold naber 2]

Removed the old bumpers and screens

 

Test fitted the frontscreens.

BREED !

 

put it all on the car

(foto is after the cage build..there wasnt light at 5.30

 

 

 

cage is in spired by pdc444 cage

 

detail fotos

 

 

Edited February 17, 2009 by arnold naber

[Francesco 2 1 Cars]

Time for a update Arnold.

[arnold naber 2]

You'r right

 

Well, Degreased the rollcage and car interieur. All painted with white hamerrite.

 

Drivers seat mounted

harnes mounted

Dashboard mounted (tophalf bottom won'tbe mounted)

Steeringwheel + snap off mounted

 

front suspension mounted

 

Bilstein Grp N Tarmac dampers

-35 mm springs

Bilstein Grp N. reardampers

309 wishbones with powerflex black

309 1.4 (TU) driveshafts

 

The car webers are now adjusted using a carbtune device.. Unfortunaly some screws are stuck so i need a new set of carbs.. But ist drivable now

 

Sold the 206 gti brakes.. and bought a rallydesign 260mm wilwood kit

 

And then it was painting time.. i had a can of paint with the car when i bought it... sprayed every thing and then mounted it

 

unfortunaly was the paint not 205 rallye white but 106 rallye white...b

 

http://www.kiekies.nl/zooi/IMG_0197.JPG

http://www.kiekies.nl/zooi/IMG_0198.JPG

http://www.kiekies.nl/zooi/IMG_0199.JPG

 

The idea was to have it finished before the 28th aug. Since then is the Peugeot GTi Club NL trackday..but i jumped from a shed yesterday and now i cant walk/ drive car..stupid me

[jonnygoodhand 0]

Looking good Arnold!

 

Are those arches extra large? They seem much bigger than the ones I had off you.

[arnold naber 2]

Hi,

 

yes these are + 1"

[apinski 0]

Nice cage What's the size of your Toyos? In my rallye I had 165/50R15 and think it's just perfect... but your's seems to be bigger?

Edited June 16, 2010 by apinski

[rallyejames 0]

keep up the good work