Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
arnold naber

[trackday_prep] Dutch Trackday 205 Rallye 1.3

Recommended Posts

Francesco

The lights in the front spoiler are gonna be replaced by the original Rallye air inlets and the mirrors are also gonna be replaced by black one's.

Share this post


Link to post
Share on other sites
arnold naber

haven't updated here for a while...so:

 

first off all i found these lights:

IMG_0249.JPG

 

nicest off all was that i found them new in the original box B)

 

Then we found out the rubbers between the carbs and the intake were not ok..newones were € 450 !!!

 

So i made them from steel... so i van use the normal weber rubbers a €1,-per peice

 

flensje3.JPG

flensje2.JPG

 

 

Then inpassed the MOT ;) /me happy :P

 

here it is next ot my girls 106 rallye...all we need now is a 306 rallye (306gti6 is allready bought and it will be rebuild :P)

http://www.kiekies.nl/zooi/IMAGE_017.jpg

 

 

 

 

The polyester hatch will arive here next week same as the polycarb window kit...with sliders..

 

Here some pictures of the engine bay.. still with the original rubbers..they are complete around kitted..will be replaced after i have made some miles on it

 

http://www.kiekies.nl/zooi/IMAGE_018.jpg

http://www.kiekies.nl/zooi/IMAGE_019.jpg

 

Then i drove it to the garage..took the hood and the hatch of..will be replaced with polyester ones

Share this post


Link to post
Share on other sites
arnold naber

Another update:

 

poly bonnet

 

http://www.kiekies.nl/zooi/IMAGE_022.jpg

 

Original is 13 Kg

this one 4Kg ! + 600grams for the aerocatch ;)

 

Then we unleashed the dremel on the bonnet B)

http://www.kiekies.nl/zooi/IMAGE_025.jpg

http://www.kiekies.nl/zooi/IMAGE_026.jpg

http://www.kiekies.nl/zooi/IMAGE_028.jpg

http://www.kiekies.nl/zooi/IMAGE_029.jpg

 

and the new poly carb windows

 

http://www.kiekies.nl/zooi/IMAGE_046.jpg

http://www.kiekies.nl/zooi/IMAGE_047.jpg

 

Poly rearhatch is also fitted... aerocatch would be a thight fit there so im going to use different bonnetpins..

 

This weekend i'll strip the doors + the dashboard.. and prepping it for the cage

Share this post


Link to post
Share on other sites
arnold naber

Well its been a while but another update

 

weight list :blush:

 

Part								 orginal							new weight
Hood								   13 Kg								  4 kg
Doorwindows						 3 Kg								  1 Kg
rearwindows					  1.5 Kg								 1 Kg
hatch								17 Kg								  7 Kg

total savings														  24 Kg

 

I bought some new rallye arches.. normal + 1" width

 

http://www.kiekies.nl/zooi/IMG_0016.JPG

http://www.kiekies.nl/zooi/IMG_0017.JPG

 

And some new frontwings with integrated rallye arches + 1"

 

IMG_0089.JPG

IMG_0090.JPG

IMG_0091.JPG

 

Tomorrw gonna strip the dashboard down.

take out the front window and tuesday the rollcage will be fitted

Share this post


Link to post
Share on other sites
jonnygoodhand

Looking good Arnold! Especially like the front arches. Are they the same as the ones you supplied me, just with an extra inch of width?

Share this post


Link to post
Share on other sites
arnold naber
  jonnygoodhand said:
Looking good Arnold! Especially like the front arches. Are they the same as the ones you supplied me, just with an extra inch of width?

 

Hi, Yes these are the same ones with an extra inch added. But these now have a closed peice on the door side.. yours dont had that i thought..

Share this post


Link to post
Share on other sites
arnold naber

Removed the old bumpers and screens

 

Test fitted the frontscreens.

IMG_0049.JPG

BREED !

 

put it all on the car

IMG_0054.JPG

(foto is after the cage build..there wasnt light at 5.30 :)

 

IMG_0052.JPG

 

 

IMG_0051.JPG

cage is in spired by pdc444 cage

 

detail fotos

IMG_0055.JPG

 

IMG_0056.JPG

 

IMG_0057.JPG

Edited by arnold naber

Share this post


Link to post
Share on other sites
Francesco

Time for a update Arnold.

Share this post


Link to post
Share on other sites
arnold naber

You'r right :ph34r:

 

Well, Degreased the rollcage and car interieur. All painted with white hamerrite.

 

Drivers seat mounted

harnes mounted

Dashboard mounted (tophalf bottom won'tbe mounted)

Steeringwheel + snap off mounted

 

front suspension mounted

 

Bilstein Grp N Tarmac dampers

-35 mm springs

Bilstein Grp N. reardampers

309 wishbones with powerflex black

309 1.4 (TU) driveshafts

 

The car webers are now adjusted using a carbtune device.. Unfortunaly some screws are stuck so i need a new set of carbs.. But ist drivable now :angry:

 

Sold the 206 gti brakes.. and bought a rallydesign 260mm wilwood kit

 

And then it was painting time.. i had a can of paint with the car when i bought it... sprayed every thing and then mounted it

 

unfortunaly was the paint not 205 rallye white but 106 rallye white...b

 

http://www.kiekies.nl/zooi/IMG_0197.JPG

http://www.kiekies.nl/zooi/IMG_0198.JPG

http://www.kiekies.nl/zooi/IMG_0199.JPG

 

The idea was to have it finished before the 28th aug. Since then is the Peugeot GTi Club NL trackday..but i jumped from a shed yesterday and now i cant walk/ drive car..stupid me

Share this post


Link to post
Share on other sites
jonnygoodhand

Looking good Arnold!

 

Are those arches extra large? They seem much bigger than the ones I had off you.

Share this post


Link to post
Share on other sites
arnold naber

Hi,

 

yes these are + 1"

Share this post


Link to post
Share on other sites
apinski

Nice cage :lol: What's the size of your Toyos? In my rallye I had 165/50R15 and think it's just perfect... but your's seems to be bigger?

Edited by apinski

Share this post


Link to post
Share on other sites
rallyejames

keep up the good work

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×