Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
number2301

Removing The Standard Gearknob

Recommended Posts

number2301

How do you get the standard gear knob off? I've recently removed a horrible metal after market one from my car only to find out that the gear stick had been cut down. So I've not got a new standard gear knob and a gear stick with an old battered gear knob on and want to swap the gear knobs over. Is this possible with it out of the car? Is it just a matter of pulling it off? I've given it a go but it doesn't seem to want to budge!

Share this post


Link to post
Share on other sites
GLPoomobile

You'll probably need to grip the shaft ( B) ) in a vice, cos it needs some force doing it in the car ( :lol: ). At least with it out the car you should hopefully avoid the embarrassment of smacking yourself in the face as you pull it off :D

 

Oh and you need to twist it 90 degrees either way as you tug on it :D

 

These topics are a goldmine for innuendo :)

Share this post


Link to post
Share on other sites
Anthony

Twist and pull lots

 

Sometimes they're a bit stubborn, but should be possible out of the car - just clamp the gear lever in a vice or similar.

Share this post


Link to post
Share on other sites
number2301

Cheers, I'll give that a go. Would it be easier in the car barring any face/knob contact related incidents B) ?

 

These topics are a goldmine for innuendo :)

 

You're telling me, I had to be really careful about my wording!

Edited by number2301

Share this post


Link to post
Share on other sites
steve@cornwall

Do you have a be1 or be3 'box?

Share this post


Link to post
Share on other sites
Arahan
Do you have a be1 or be3 'box?

 

Is there a difference with regards to removing a BE1 knob?

Share this post


Link to post
Share on other sites
steve@cornwall
Is there a difference with regards to removing a BE1 knob?

 

 

Errr,,no,,,,, I mis-read the post and thought he wanted a stick and knob :blush::lol:

Share this post


Link to post
Share on other sites
dave_gti

gear knobs are a pain, i had one when i bought my Vectra a couple of years back, it was fairly loose and it kept untwisting, and my girlfriend tightened it one day (and shes not a Russian shot putter or anything) and since that day it never came off :|. i wanted to change it so i tried a wrench etc, and it just crushed the gear knob and it wouldn't turn, so i gave up in case i did some damage to the car

Share this post


Link to post
Share on other sites
Rich_p

quite simply yank it ;)

Share this post


Link to post
Share on other sites
number2301

If anyone's interested I managed to get the gear knob off with it out of the car, my girlfriend pulled one end while I pulled the other. :ph34r:

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×