nick 3 Posted February 13, 2008 As title says, how do I wire up the std rev counter on a Gti-6 on carbs? Nick Share this post Link to post Share on other sites
welshpug 1,657 Posted February 13, 2008 doesn't matter what the intake is, what controls the spark? Share this post Link to post Share on other sites
nick 3 Posted February 13, 2008 I put that it was on carbs to show it isn't on 6 management (which is another problem all together!!) I think it's on 8v dizzy (mates car) Nick Share this post Link to post Share on other sites
welshpug 1,657 Posted February 13, 2008 Right sorry! if its on 8v dizzy then it shouldnt need anything changing to make it work at all. Share this post Link to post Share on other sites
nick 3 Posted February 13, 2008 Oh right. Doesn't it normally get the signal from the ecu?? This is in a 205 by the way!! Nick Share this post Link to post Share on other sites
welshpug 1,657 Posted February 13, 2008 nope! takes signal from the coil via wire 112. I guessed that it was in a 205 Share this post Link to post Share on other sites
nick 3 Posted February 13, 2008 Thought you might have!! Right, same as an mi then, I'll have a look at the weekend. Cheers mate, Nick Share this post Link to post Share on other sites
pj838 0 Posted February 13, 2008 nope! takes signal from the coil via wire 112. I guessed that it was in a 205 Any idea what colour the 112 wire is? Hope its not the thick green I cut off today! Need to get my rev counter working. cheers Share this post Link to post Share on other sites
