kate205gti 4 Posted February 7, 2008 daft question for the day.. is this the right way round on a 309 beam please?? Share this post Link to post Share on other sites
jackherer 543 Posted February 7, 2008 Yes, its only the rear ones that need turning on a 309 beam, those ones are the same way round on both cars. Share this post Link to post Share on other sites
All Praise The GTI 3 Posted February 7, 2008 beat me to it jackherer. as he said its just the other ones go 180degrees around Share this post Link to post Share on other sites
kate205gti 4 Posted February 7, 2008 so that way is the right way? the other ones are round metal cylinders Share this post Link to post Share on other sites
All Praise The GTI 3 Posted February 7, 2008 if your fitting it with solid mounts kate then it dont matter. just you will need to lever the mounts over to the holes. easy if there is two of you under there Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted February 7, 2008 They do have a D and a G on them. This is not for Dolce and Gabanna, but for Droit and Gauche, i.e. right and left in French! Share this post Link to post Share on other sites
kate205gti 4 Posted February 8, 2008 not on the 309 ones i did look! Share this post Link to post Share on other sites
welshpug 1,657 Posted February 8, 2008 Its only the 1.9 brackets that have the markings D+G as they are offset, all others and 309 are the same. Share this post Link to post Share on other sites
