yeti-dj 7 Posted February 6, 2008 Hello, was under the car the other day , as seems to happen way to often with these 205's, and noticed that the power steering ram is weeping fluid from the end of the ram, guess having no dust boot fitted wont help but never mind.... Anyway time to replace the ram so the question is does anybody know where i can get a replacement ram from either new or reconned? also gonna replace the 2 short pipes that connect onto the ram so will need them, or if you have a good ram lying around that you dont need give me a shout... And before anyone says it i am not binning the power steering, the girlfriend would kill me!!! thanks for the help.... Share this post Link to post Share on other sites
Rob Thomson 6 Posted February 6, 2008 GSF do the ram. You'll find it on their website. £80 rings a bell but I could be completely wrong. There must be loads of perfectly serviceable second hand ones floating around out there. I imagine for the pipes you'll struggle to find any outside a Peugeot dealer, but this forum is a wonderful thing and it has to be worth sticking an advert in the Wanted section. Share this post Link to post Share on other sites
Anthony 1,003 Posted February 6, 2008 AFAIK 306 PAS rams are the same, and there's loads of them being broken or in scrappies Share this post Link to post Share on other sites
vern 0 Posted February 6, 2008 You will need a large "star bit" to remove one of the mounting bolts, or a set of stillsons like I used. Share this post Link to post Share on other sites
yeti-dj 7 Posted February 6, 2008 You will need a large "star bit" to remove one of the mounting bolts, or a set of stillsons like I used. haha, was gonna go the mole grip way if i dont have a torx to fit... cheers.. Share this post Link to post Share on other sites
Dream Weaver 2 Posted February 7, 2008 I think its a 55 torx bit, same as the Mi16 head bolts. Could be a 50 though so take both. Share this post Link to post Share on other sites
RossD 44 Posted February 8, 2008 Be aware though that the 306 ones also leak (The ones I have had always did) at quite an early age. Share this post Link to post Share on other sites