dan1120 0 Posted February 2, 2008 new to pugs,but will a mi16v head fit my 205 1.9 block?? Share this post Link to post Share on other sites
Ryan 99 Posted February 2, 2008 It's not a straight swap, but it can be done. It's easier to swap the whole mi16 engine over though, unless you need to keep the original block because of the rules of certain race series. Share this post Link to post Share on other sites
dan1120 0 Posted February 2, 2008 It's not a straight swap, but it can be done. It's easier to swap the whole mi16 engine over though, unless you need to keep the original block because of the rules of certain race series. oh i see,i after an mi 16v engine if anybody has one?? Share this post Link to post Share on other sites
DrSarty 90 1 Cars Posted February 2, 2008 (edited) oh i see,i after an mi 16v engine if anybody has one?? Have a browse through 'for sale', quite a few knocking around, and a good choice at the moment of 1.9 (alloy) or 2.0 iron Mi engines, as well as some 306 S16 & (what I would recommend) GTi6 engines. A relatively simple and ultimately rewarding swap too. Rich P.S. I was originally from Peterborough. Welcome to the forum. Edited February 2, 2008 by DrSarty Share this post Link to post Share on other sites
dan1120 0 Posted February 3, 2008 Have a browse through 'for sale', quite a few knocking around, and a good choice at the moment of 1.9 (alloy) or 2.0 iron Mi engines, as well as some 306 S16 & (what I would recommend) GTi6 engines. A relatively simple and ultimately rewarding swap too. Rich P.S. I was originally from Peterborough. Welcome to the forum. cheers mate ill have a look few on ebay aswell,just spoke to paul at 205 parts hes got one,so watch this space. Share this post Link to post Share on other sites
