Mi16 Valve Stem Oil Seals

[yorkshirekowboy 19 1 Cars]

hi all,

 

im needing a set of valve stem oil seals, looked for the part numbers but so many, but found these on fleabay.

 

clicky

 

cheers

 

danny

[Richie-Van-GTi 71 2 Cars]

yes they look the right ones, If your not desperate drop me a pm and I will check the garage tomorrow for you. Fairly sure I have at least 24 of these and all genuine pug going spare, Im only up the road as well

[luggy 13]

Hi Danny funnily enough I was thinking of buying these but had a look at the haynes manual, valve stem diameter for 1.6 and 1.9 8v is between 7.83mm-7.98 Inlet and exhaust

 

On the mi16 1.9 and 2l, valve stems are smaller at 6.83-6.98 inlet and exhaust. So from that info I'd say no.

[Richie-Van-GTi 71 2 Cars]

if luggy is right then I retract my offer as mine will all be 8v stem seals.

[yorkshirekowboy 19 1 Cars]

if luggy is right then I retract my offer as mine will all be 8v stem seals.

 

 

well mate if you could find out that would be good mate.

 

whats the part number for the mi16 ones then, ?

[yorkshirekowboy 19 1 Cars]

Hi Danny funnily enough I was thinking of buying these

 

 

great minds think alike haha

[luggy 13]

well mate if you could find out that would be good mate.

 

whats the part number for the mi16 ones then, ?

 

As far as Im aware you can only get them as a part of the re-jacketing kit (head set kit) from pug for about £170 or £63.50 from GSF.

 

The ones on ebay may do the job but do you want to take that chance?

[yorkshirekowboy 19 1 Cars]

As far as Im aware you can only get them as a part of the re-jacketing kit (head set kit) from pug for about £170 or £63.50 from GSF.

 

The ones on ebay may do the job but do you want to take that chance?

 

 

surly you can buy them seperate thou from pug...

[luggy 13]

http://stuartmcguire.co.uk/pug/GB/405F/0/09A30A.HTM