Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Spiky

Speedo Not Working After I Changed The Diff

Recommended Posts

Spiky

no i'm pretty sure i got the cable in ok.

 

have i put the cover back on the diff wrong???

Share this post


Link to post
Share on other sites
Spiky

just thought,

 

i have swapped the 1.9 box for a the new 1.6 box which has the new diff

 

can i put the 1.9 speedodrive cover on the 1.6 box???

Share this post


Link to post
Share on other sites
Ryan

Did you remember to put the large plastic gear over the end of the diff (where the d/s driveshaft goes in)?

Share this post


Link to post
Share on other sites
smighall

If the cable is in properly it must be the plastic gear. :)

Share this post


Link to post
Share on other sites
Pugnut

i have had a similar problem . i had inadvertently pulled the cable out the back of the clocks . its very easy to not clip the speedo cable ito the back of the clocks when refitting the binnacle, and my pulling around at the gearbox end had popped it off the clocks at the other end.

Share this post


Link to post
Share on other sites
Spiky
If the cable is in properly it must be the plastic gear. :)

 

 

you are right, top marks.

 

as there wasn't one in there.... pmsl

 

 

 

works now

Share this post


Link to post
Share on other sites
Sign in to follow this  

×