hodgy 0 Posted January 23, 2008 (edited) ive just taken my de cals off my cars as i was gonna re spray it black.now i have to re spray it as the stickers have pulled the paint off down to the undercoat(in places) from where it was sprayed a couple years ago. the pic ive taken are too big to up load onto the site so i cant show anyone but i cant beleive ive got huge patches of paint missing off my car.both rear 1/4s are down to base paint and near the boot down to under coat,doors are fine for some reason and front wings have no laquer left. my car looks like a poo bag, im a lil gutted but on the up side its less sanding to do next month when it goes to be painted Edited January 23, 2008 by hodgy Share this post Link to post Share on other sites
Paintguy 0 Posted January 23, 2008 Ooops! Sounds like it either wasn't sanded properly before it's last paint job, or the stickers were applied a bit too soon. It's a good job you're planning to have it painted really Share this post Link to post Share on other sites
hodgy 0 Posted January 23, 2008 my friend says it wasnt painted right.when i bought it,it had been painted 1 month before i got it. i can see why too as ive started sanding stuff down found loads of filler near the rear arches so it was re sprayed cos he bodged the rust. when i can make pics smaller ill start a project page as its only gonna take 2month to sort out as im only waiting for my mate to get his garage then i can start the proper work. would you grind the nipples off that hold the trims off then fill over them or would you cut them and sand them? Share this post Link to post Share on other sites
steve@cornwall 100 Posted January 23, 2008 Must be something about today, these pics tell the story? Share this post Link to post Share on other sites
hodgy 0 Posted January 26, 2008 well treated the rust and put paint over it to stop it rusting and started to sand the car.ive got one rear 1/4 sanded then id had enough Share this post Link to post Share on other sites
Tesstuff 222 Posted January 26, 2008 Hodgy , just get yourself the Image Resizer from Microsoft, gives you plenty of size choices. Image Resizer Regards Daz Share this post Link to post Share on other sites
