Which Water Pipe?

[Tony_205 1]

Hi all, im a bit stuck lol,

 

On the bottom of the throttle body, next to the vacuum advance inlet, there is another brass water connection - - any idea which tube fits onto that connection and where does the tube lead to?

 

After having done a top end rebuild, iv fitted the inlet manifold with all new gaskets bolts etc, i have just realised that i havnt fitted this pipe

 

Any ideas? Thanks Tony

[djinuk 2]

on mine its simply not used, and is covered with a rubber blanking cover

[welshpug 1,666]

there's a test point that'll usually have a blanking plug as mentioned, the 2 water pipes are quite bit larger.

[Miles 331 1 Cars]

You on;ly need to stick the water pipe from the expansion bottle to the top of the stat housing, Bypass the T/B all-together as you don;t need a heated one

[Tony_205 1]

Thanks for the replies guys but its still not answered my question really...

 

If there is no pipe on the inlet manifold then water trickles out... This might be a better question;

 

Where do the two pipes from the header tank go? 1 goes to the radiator and one goes under the air flow meter, then goes ???

[Miles 331 1 Cars]

Above the Stat housing, thats why I posted that the right side of the expansion bottle should just go to the stat housing instead, less pipes and less chance of a leak and if you want to remove the inlet allot less hassle

[Tony_205 1]

Ahhh right... Got ya mate thank-you