Which Ht Lead Goes Where?

[Atari Boy 11]

My 1.6 has been converted to a 1.9 and I need to work out which HT lead go to which dizzy terminal and cylinder .

 

I have done a search and can't anything relivant.

 

Any ideas, photos diagrams would be appreciated, I can’t wait to get it out on the road.

 

Thanks

 

Jonny

[McPikie 0]

Same as the 1.6 I would imagine

[Atari Boy 11]

I was told that they are different and cunningly even if they are I have taken the 1.6 ones off the head.

Help, someone pleeeeeeeeeeeeeeease.....

[pug_ham 245 3 Cars]

Have you tried a search?

 

This has been posted (with pictures showing the order) plenty of times before.

 

Its the same order on the 1.6, 1.9 & Mi16 though.

 

Graham.

[Atari Boy 11]

I have tried a search and the search engine hates the HT bit.

[DirtyFlare 0]

see as I'm nice,

 

check this LINK out

[Atari Boy 11]

Dirty, thank you but the link does not work, but below has it covered.

 

old topic

 

 

Sorted, I hope.

 

Jonny

Edited January 18, 2008 by Atari Boy

[pug_ham 245 3 Cars]

I have tried a search and the search engine hates the HT bit.

Minimum search string length is 4 when using FullText Index enabled database which might explain why trying just HT or HT leads didn't work.

 

Graham.

[steve@cornwall 100]

I was told that they are different and cunningly even if they are I have taken the 1.6 ones off the head.

Help, someone pleeeeeeeeeeeeeeease.....

 

- top lead outside of cap goes to plug 3rd furthest from dizzy, king lead obv. below this. next lead down goes to plug 4th furthest from dizzy ( by cam cover) back lead at bottom of cap goes to plug 2nd from dizzy, with the top lead at rear of dizzy cap going to plug closest to dizzy. Clumsy way of putting it but hope it helps. If you leave the leads on the cap, they are obvious according to length

[Atari Boy 11]

Thanks Graham, I get there in the end!

[DirtyFlare 0]

the link works for me, but maybe its because you arent signed up to psooc forums