dean 0 Posted January 15, 2008 hi does any one no what i do about the two outlets on the top of the expansion tank and what do i do with the outlet on top of the rad do i go from the expansion tank to the top of the rad and leave the other outlet to atmosphere Share this post Link to post Share on other sites
Spiky 37 Posted January 18, 2008 the top right (look from front of car) block off top left goes to OE position of top left rad bottom T's into the pipe coming from heater matrix to engine Share this post Link to post Share on other sites
Alastairh 47 Posted January 18, 2008 Aaah, thats where that paint picture went. I had a search for it, but couldn't find it. Share this post Link to post Share on other sites
Spiky 37 Posted January 18, 2008 it's on my photobucket account Share this post Link to post Share on other sites
dean 0 Posted January 18, 2008 ok cheers i thought went there but wasnt sure Share this post Link to post Share on other sites
ross009 0 Posted January 18, 2008 im doin my water system at the mo to but im not using the heater matrix so does that mean i have a hose coming out the bottom of the exapnsion tank with a t in it and i take one to the thermostat housing the other one straight to the smaller pipe on the back of the block? does this mean the rad effectively has the two big hoses feeding water in and just the smaller on on the top left of the rad as the return of the expansion tank? sry to hijack your topic dean! Share this post Link to post Share on other sites
Spiky 37 Posted January 18, 2008 the top left of the rad is just for expansion the circulation will be done from the bottom left of the rad Share this post Link to post Share on other sites
Alastairh 47 Posted January 19, 2008 If your after bungs. Go down the scrappy and pull off the air box off a Citroen ZX TD. They have good ones on them Al Share this post Link to post Share on other sites
