ross009 0 Posted January 14, 2008 hi could someone with an xu10 just clarify a couple of things for me theres 2 vacum inlet ports on the under side of the inlet manifold where do these go to? ive put them to brake servo and fuel rail? also the 2 breather hoses on the throttle bodie pointing towards the passesnger side wing where do the hoses off these go ive got one goin to rocker cover and one 2 map sensor? think i have some wrong? cheers Share this post Link to post Share on other sites
welshpug 1,666 Posted January 14, 2008 which XU10J4 is it? D R or RS? Share this post Link to post Share on other sites
ross009 0 Posted January 14, 2008 which XU10J4 is it? D R or RS? sorry its an xu10j4r from a 306 xsi 16v. cheers Share this post Link to post Share on other sites
jim205GTI 3 Posted January 15, 2008 i shall go and have a look in a bit!!! let you know shortly! Share this post Link to post Share on other sites
jim205GTI 3 Posted January 15, 2008 i'll try and get a look tomorrow now as it kept on pi**ing it down earlier bloody weather!!! Share this post Link to post Share on other sites
ross009 0 Posted January 15, 2008 ok mate no probs cheers Share this post Link to post Share on other sites
jim205GTI 3 Posted January 17, 2008 Finally able to do it the two on the underside of the manifold one goes to the fuel rail and other one goes to the servo On the throttle body side on breather goes to the rocker cover ( joins with another hose) and the the other hose looks like it goes to the power steering reservoir but with that one i am not entirely sure Share this post Link to post Share on other sites
