markw 1 Posted January 3, 2008 as above will and s16 head fit straight onto the alloy mi block without any problems Share this post Link to post Share on other sites
James_m 0 Posted January 3, 2008 Never actually tried but 90% sure it will. They certainly look identical. However, im pretty sure the S16 head does'nt have the threaded holes for the distributer if your planning to run the Mi16 management. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted January 3, 2008 No in simple term's, The Water Pump bolt needs spacing up, The exhuast studing is different and the oil drain on the side will need blocking up, Other than that it's the same Share this post Link to post Share on other sites
