sutol 0 Posted December 30, 2007 Before I fit Quickshift to car, will it make wrong gear selection an issue ? What I dont want is to be selecting 3rd instead of 5th if they are too close together on the stick or dropping down to 2nd instead of 4th by mistake. Done this once and trashed an engine ! Any veiws appreciated Share this post Link to post Share on other sites
Super Josh 4 Posted December 30, 2007 I used a quickshift with a six speed 'box. It was the reduced length 'L' bracket type. This only reduces the for and aft throw, so the spacing between the gears remains exactly the same. Josh Share this post Link to post Share on other sites
sutol 0 Posted December 30, 2007 I used a quickshift with a six speed 'box. It was the reduced length 'L' bracket type. This only reduces the for and aft throw, so the spacing between the gears remains exactly the same. Josh Thanks mate, that's what I was hoping...Quick shift it is then, just got to find the thread ..After tea perhaps Share this post Link to post Share on other sites
dean 0 Posted December 30, 2007 do you not find the quickshift hit the gti6 manifold Share this post Link to post Share on other sites
GTI6BOY 29 Posted December 30, 2007 iirc you cant use a quickshift with a gti-6 conversion? correct me if im wrong Share this post Link to post Share on other sites
sutol 0 Posted December 30, 2007 do you not find the quickshift hit the gti6 manifold It's an Mi16 Share this post Link to post Share on other sites
