les3002 0 Posted December 29, 2007 swapping the drums on my gti atm and have come to remove the backplates but the 4 bolts that hold them on are well rusty so before attacking them could someone confirm what type they are torx or allen? cheers Share this post Link to post Share on other sites
Pugnut 9 1 Cars Posted December 29, 2007 they are allen , but they are usually so rusty that hammering in an oversized torx works better. Share this post Link to post Share on other sites
welshpug 1,657 Posted December 29, 2007 I've seen both, well on a 306 that is. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted December 29, 2007 I've only seen Allen on the radius arms (205, 309 & ZX) that I've stripped. Like Pugnut says, they are usually so rusty that I've got an old 7/16 bi-hex socket i hammer over the head to get them out now rather than bother rounding the off. Graham. Share this post Link to post Share on other sites
les3002 0 Posted December 29, 2007 lol cheers guys ill have a crack at them tomorrow hopefully can avoid drilling them out. Share this post Link to post Share on other sites
28CRAIG 2 Posted December 30, 2007 I've seen both, well on a 306 that is. Same here seen torx on 306's but only allen on 205's 6mm i think. Share this post Link to post Share on other sites
les3002 0 Posted December 30, 2007 yeah they were allens came out ok aswell. Share this post Link to post Share on other sites
