sutol 0 Posted December 4, 2007 I know it's been covered before but I am having trouble finding it. My 32mm socket wont go near the front hub nut, the search turned up either 33 or 34mm but which is it as I'll have to buy a socket tomorow. It's the one with the retaining clip. Ta Share this post Link to post Share on other sites
sutol 0 Posted December 4, 2007 35mm clucking bell.... no wonder I've nothing to fit it Thanks I'll go and haggle for one tomorrow Share this post Link to post Share on other sites
welshpug 1,657 Posted December 4, 2007 yeh they're sold as Peugeot/Citroen hub nut sockets for other cars with no mention of the 205. draper one I have is like this one - http://cgi.ebay.co.uk/DRAPER-39047-35mm-1-...VQQcmdZViewItem Share this post Link to post Share on other sites
Ryan 99 Posted December 4, 2007 It might depend is they're the original driveshafts or not. The originals are 35mm, which is an unusual size. Many non-oem replacements are 32 or 36mm. Share this post Link to post Share on other sites
t16ryan 1 Posted December 4, 2007 prob best to get a 36mm as will undo it if its still the original 35 and if its a aftermarket shaft prob 36 so will undo it either way Share this post Link to post Share on other sites
sutol 0 Posted December 4, 2007 (edited) prob best to get a 36mm as will undo it if its still the original 35 and if its a aftermarket shaft prob 36 so will undo it either way I'll get a 35 then if it wont fit I'll take it back and swap it By the way I could measure it first, is it 35 across the flats ?? Edited December 4, 2007 by sutol Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted December 4, 2007 By the way I could measure it first, is it 35 across the flats ?? Yes, what other way do you measure a nut? Graham. Share this post Link to post Share on other sites
205007 12 Posted December 6, 2007 Yes, what other way do you measure a nut? Graham. PMSL oh you got me there Share this post Link to post Share on other sites
