dean 0 Posted November 30, 2007 hi i have finished my gti6 conversion put when i turn the igntion on the fuel pump is not coming on if the ecu is locked will that be doing this. how can i find out if my ecu is locked Share this post Link to post Share on other sites
smighall 1 Posted December 1, 2007 You need to send a switched 12v to the double fuel/ignition relay. Pin 14 springs to mind but check first. Share this post Link to post Share on other sites
dean 0 Posted December 1, 2007 were is pin 14 and the double relay Share this post Link to post Share on other sites
welshpug 1,657 Posted December 1, 2007 in the gti6 wiring loom, about 12" from the ECU, usually clipped to the Battery box. Share this post Link to post Share on other sites
dean 0 Posted December 1, 2007 so do i need to take a 12v feed to that cheers Share this post Link to post Share on other sites
welshpug 1,657 Posted December 1, 2007 of course!!! without a feed to that there wont be 12v at the ECU, coilpack + fuel pump + Injectors! Share this post Link to post Share on other sites
dean 0 Posted December 1, 2007 whats the best way of giving that a 12v feed and is it a plug (pin 14) Share this post Link to post Share on other sites
