M_R_205 5 1 Cars Posted November 27, 2007 (edited) Iv tryed a search but i just got some rather random results lol Bassicaly im soon going to be fitting a 309 beam to my gti, will i nedd to `adjust` the plastic arches at all?? Im goign to be using 1.6 wheels with 185 tyres on my old dturbo i just did some bodge flareing but cant do that with plastic!! Cheers Paul Edited November 27, 2007 by M_R_205 Share this post Link to post Share on other sites
pug_ham 245 3 Cars Posted November 27, 2007 Yes but it depends on how much you are lowering it. I ran mine with 1.6 alloys for a good few months & it only caught the trim when I had it loaded up with my track wheels etc for a weekend at Croft & even then it only took a couple of catches for it to wear away the parts that touched. Still, better to trim them with the wheels etc off as you swap the beam. Graham. Share this post Link to post Share on other sites
M_R_205 5 1 Cars Posted November 28, 2007 Yes but it depends on how much you are lowering it. I ran mine with 1.6 alloys for a good few months & it only caught the trim when I had it loaded up with my track wheels etc for a weekend at Croft & even then it only took a couple of catches for it to wear away the parts that touched. Still, better to trim them with the wheels etc off as you swap the beam. Graham. Thanks for the reply, if it catches slightly then il trim it, i was going to take the trims off to spray blac or replace any way so its no extra effort!, Cheers Paul Share this post Link to post Share on other sites
