Solenoid Wire On 405 Mi16 Loom

[yorkshirekowboy 19 1 Cars]

hello

 

right i have juts done my wiring for my 205 mi16, but im stuck, its a 405 mi16 loom, i have found the big heavy duty wire which goes starter and alternator then to the pos side of the battery, but i have found another spade connector on the solenoid which i cant seem to find on my loom, its the same case with the alternator, but i believe on the alternator wire is bult into to the loom??

 

So just wondering if youguys have had the same probs as me of located the spade clip that goes on the bottom of the solenoid. is it in the loom some where, only thinkg i have found is 3 red wires cut located on the end of my 405 loom, wondering if these could be them?

 

 

thanks

 

danny

[yorkshirekowboy 19 1 Cars]

hello

 

right i have juts done my wiring for my 205 mi16, but im stuck, its a 405 mi16 loom, i have found the big heavy duty wire which goes starter and alternator then to the pos side of the battery, but i have found another spade connector on the solenoid which i cant seem to find on my loom, its the same case with the alternator, but i believe on the alternator wire is bult into to the loom??

 

So just wondering if youguys have had the same probs as me of located the spade clip that goes on the bottom of the solenoid. is it in the loom some where, only thinkg i have found is 3 red wires cut located on the end of my 405 loom, wondering if these could be them?

thanks

 

danny

hello

 

just got back from doing my engine loom, and i found it out, located both, the three broken wires must be the other sensors, oil pressure/water temp ecu/ etc

 

thanks

 

danny