Water Distribution Block / Thermostat Housing Mi16

[kyepan 291]

Hi all,

 

is the temp sender the sensor vertically mounted into the top of the thermostat housing / distribution block?

 

as its loose inside (you can wiggle the central part) and sounds like its failed sealant wise, because when you squeeze a pipe it wheezes.

 

any help appreciated, or even better a picture!

[Ryan 99]

 

1 = ECU temperature sensor

2 = Temp gauge sender

3 = Coolant warning light switch

 

2 & 3 may both screw into either hole iirc. Whichever one is the warning light switch should have the temperature rating stamped on one of the flats.

Edited November 10, 2007 by Ryan

[kyepan 291]

 

1 = ECU temperature sensor

2 = Temp gauge sender

3 = Coolant warning light switch

 

2 & 3 may both screw into either hole iirc. Whichever one is the warning light switch should have the temperature rating stamped on one of the flats.

awesome, thats exactly what i needed. 3 is the one that's leaking.

 

cheers

 

Justin

[KRISKARRERA 2 1 Cars]

Or if you stole your engine from a 405 with aircon there'll be a bitron sensor in the bottom too