kaich 6 1 Cars Posted November 10, 2007 (edited) on my 1.9 8V there is a pas pump (under the alternator) if I do a mi16 conversion to fit new inlet manifold and new engine mount I have to move the alternator to the pas pump position, right? I think there's no way to swap alternator position with pas pump position (pas pump is smaller than alternator), or am I wrong? so I have to move the pas pump in other position..... I have read something here (thanks search engine): http://forum.205gtidrivers.com/index.php?s...44&hl=power some pics about? I can't understand where the pas pump fit mi16....does pump pulley fit in exaust cam? thanks Edited November 10, 2007 by kaich Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted November 10, 2007 it goes on the gearbox and is driven by exhaust cam pulley, yes. Share this post Link to post Share on other sites
kaich 6 1 Cars Posted November 11, 2007 it goes on the gearbox and is driven by exhaust cam pulley, yes. like this? http://www.stuartmcguire.co.uk/pug/GB/405F/4/40G10A.HTM right? But in wich way are fit the pulley in the exaust cam? Share this post Link to post Share on other sites
