TaffyTim 6 Posted October 13, 2007 (edited) My Mi16 is now run in and I have finally got around to giving it an oil change, so i got it on a set of rollers with the guys from the Nissan Primera Owners Club today. I was expecting a little better results especially in the torque department which produced 138lb/ft. The ponies came in at 162bhp at 6306rpm so im not too disappointed with that. (my sig has my engine spec). The rollers did seem accurate as there were a mixture of happy and disappointed Primera owners. Should I have expected any more out of the engine? Iain at Power Dynamics did suggest a set of Vernier Pulleys to be fitted to try and bring the peak of the power curve down the rev range. Is this good advice? Edited October 13, 2007 by TaffyTim Share this post Link to post Share on other sites
Sandy 191 Posted October 14, 2007 Standard inlet I take it? Share this post Link to post Share on other sites
TaffyTim 6 Posted October 14, 2007 Standard inlet I take it? Yeah, standard inlet and its using a mi16 loom Share this post Link to post Share on other sites
Stu 18 Posted October 14, 2007 Is that a wheel or flywheel figure bud? Share this post Link to post Share on other sites
TaffyTim 6 Posted October 14, 2007 thats the flywheel figure, the wheel was showing 134 Share this post Link to post Share on other sites
CaptainK 11 Posted October 16, 2007 Out of interest, what *should* a 1993 1.9 GTi be roughly running - BHP and torque at the wheels? Last time I checked mine it was running 88bhp at the wheels and about 115lbs/ft. Its just that I don't think its running right..... Share this post Link to post Share on other sites
KRISKARRERA 2 1 Cars Posted October 16, 2007 Hey looks just like mine.... Share this post Link to post Share on other sites
TaffyTim 6 Posted October 16, 2007 Yeah they are very similar kris. The torque curves both alter at the 4000ish revs. The lack of curve in the bhp results are the same too Except yours keeps going where mine drops off. What spec is your engine? Share this post Link to post Share on other sites
KRISKARRERA 2 1 Cars Posted October 16, 2007 My engine is standard, apart from a Miles special rebuild a few years ago. Share this post Link to post Share on other sites
TaffyTim 6 Posted October 17, 2007 My engine is standard, apart from a Miles special rebuild a few years ago. Nice, you've gotta be happy with that result Share this post Link to post Share on other sites
