damo 17 2 Cars Posted October 13, 2007 my oil sender hole in the block is filled in, so I want to use the warning sensor conection (Left hand one, smalled sensor) using a T piece to connect the pressure sender and the warning sensor. anyone know what T piece i need ? http://cgi.ebay.co.uk/Oil-Pressure-Gauge-T...1QQcmdZViewItem Any good for the job ? Damo Share this post Link to post Share on other sites
damo 17 2 Cars Posted October 13, 2007 I have also found the following adapters ? any idea on the sizes ? LMA052: Oil Gauge T-Piece, M12x1.5 to 1/8" NPT 6.95 LMA053: Oil Gauge T-Piece M14x1.5- 1/8NPT (TIM249) 6.95 LMA056: Oil Pressure T-Piece, 1/8*1/8*1/8NPT (Same as LMA010) 6.25 LMA059: Oil Pressure T-Piece, 3/8*1/8NPT (TIM295) 4.95 LMA060: Oil Gauge T-Piece, 3/8BSF 6.95 Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted October 14, 2007 The thread in the block for the warning sender is M16 x 1.5, same as the sump plug so you will need a T piece that size. Graham. Share this post Link to post Share on other sites
returnofjim 0 Posted October 15, 2007 The thread in the block for the warning sender is M16 x 1.5, same as the sump plug so you will need a T piece that size. Graham. I got one from Halfords!! ordered direct from LMA, was a few quid. About the only time halfords have come in handy Share this post Link to post Share on other sites
steve@cornwall 100 Posted October 15, 2007 Once you have the T piece, I found some adaptors to step down from the larger to smaller thread on a Skoda (felicia I think) master cylinder at the scrappy but the car got sold before I got around to getting them off! (Thought the new owner could have fun with it instead :lol) Share this post Link to post Share on other sites
CaptainK 11 Posted October 16, 2007 Out of interest, where abouts on the engine is the oil pressure / STOP switch senders? (1.9 1993 GTi) Share this post Link to post Share on other sites
j_turnell 137 3 Cars Posted October 16, 2007 Just to the right of the Alternator on the block, the Stop switch is the smaller one and the larger the sender unit. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted October 16, 2007 Stop light switch on left, oil pressure sender on right. Graham. Share this post Link to post Share on other sites
CaptainK 11 Posted October 16, 2007 Thanks guys. I'll have a look later. Share this post Link to post Share on other sites
