DaveW 6 Posted October 12, 2007 Right, Miles wont make up the long gear rod unless he can get more than 10 people interested sooo, who wants one? its has to be made speical as the TU rod has a bend for the subframe. Share this post Link to post Share on other sites
GazRallye 0 Posted October 12, 2007 I saw this on ebay if its any help to you? How many rods are there in total needed? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=012 Share this post Link to post Share on other sites
bren_1.3 1 Posted October 12, 2007 id be provisionally interested if they were rose jointed at the very least on the gear stick end. Share this post Link to post Share on other sites
DaveW 6 Posted October 12, 2007 Gaz thats the kit but its only the rods from the box to the L shift, the long rod im on about is the one from the gear lever to the L shift. not sure about rose jointed i just think it will be the same as the others on ebay ie better than standard. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted October 12, 2007 Rose joint's are no problem, Cost wise can be fairly cheap to expensive for PTFE one's as the basic rod stays the same. Share this post Link to post Share on other sites
bren_1.3 1 Posted October 12, 2007 im in for a rod then...... Share this post Link to post Share on other sites
GazRallye 0 Posted October 12, 2007 What kind of price can we expect to pay for one of these Miles? Share this post Link to post Share on other sites
christopher 5 1 Cars Posted October 13, 2007 I could be interested too depending on price.. Share this post Link to post Share on other sites
welshpug 1,657 Posted October 13, 2007 I guess there wouldn't be specific to the TU application would they? Share this post Link to post Share on other sites
bren_1.3 1 Posted October 14, 2007 I guess there wouldn't be specific to the TU application would they? the long rod would be TU specific as it has a bend in it to clear the *i think* steering rack. Share this post Link to post Share on other sites
trogboy 17 Posted October 17, 2007 I'm interested in the full set to replace my old worn ones. Share this post Link to post Share on other sites
