damo 17 2 Cars Posted October 5, 2007 i have a cti and looking at my car, my wishbones look like these http://www.stuartmcguire.co.uk/pug/GB/205N/3/35B01A.HTM http://www.timotorsport.co.uk/ti_link2.asp?link_id=12 (TCA bush kit picture) I think the cti should have the more trangle type ? It was originally a 1.6 cti 1991. it has had a 1.9 engine put in it. Any help with my confusion is welcome lol. Damo. Share this post Link to post Share on other sites
t16ryan 1 Posted October 5, 2007 Thats the right ones mate like the base model ones, you can upgrade to the GTi frame and arms but these are usually good enough Share this post Link to post Share on other sites
steve@cornwall 100 Posted October 5, 2007 i have a cti and looking at my car, my wishbones look like these http://www.stuartmcguire.co.uk/pug/GB/205N/3/35B01A.HTM http://www.timotorsport.co.uk/ti_link2.asp?link_id=12 (TCA bush kit picture) I think the cti should have the more trangle type ? It was originally a 1.6 cti 1991. it has had a 1.9 engine put in it. Any help with my confusion is welcome lol. Damo. Not this one? I know it changed hands again recently after a bit of modification Share this post Link to post Share on other sites
CaptainP 2 Posted October 5, 2007 Best thing about the base model arms is that they are cheap!!! Nearly as cheap as buying a set of bushes for the GTI. I just replaced an arm on my CTI £13 with the VAT. Share this post Link to post Share on other sites
damo 17 2 Cars Posted October 7, 2007 (edited) Not this one? I know it changed hands again recently after a bit of modification i dont believe it!! thats my car lol. pm sent as i know nothing about it really lol. Edited October 7, 2007 by damo Share this post Link to post Share on other sites
steve@cornwall 100 Posted October 7, 2007 i dont believe it!! thats my car lol. pm sent as i know nothing about it really lol. My old project CTI! ( I didn't lower it, that was done later) These may be of interest http://s58.photobucket.com/albums/g279/pug...0cti/?start=all http://forum.205gtidrivers.com/index.php?s...c=67634&hl= http://forum.205gtidrivers.com/index.php?s...c=73228&hl= so, It's a BX 1.9 engine with a turbo diesel gearbox! If you bought it from the ebay ad. I saw........some of it was a little fanciful of how much was spent on it's rejuvenation. but the car drove better than any other 205 I've owned! (It's still pictured in my avatar) enjoy it, it's a good example. I would imagine the lower arm balljoint covers have been split during lowering? as they were both nice and tight a few months ago. If they're "wobbly" try some new pinch bolts before splashing out on new arms Share this post Link to post Share on other sites
