Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest andywillis89

Urgent, Ignition System

Recommended Posts

Guest andywillis89

ok guys, just changed the head gasket on my 1991 XU 1.9Engine. All back in ok but when i turn the key it only cranks over, wont start. There is fuel to the injectors but they're not injecting, spark plugs bone dry. Also no oil pressure or warning light on dash. Please can someone state the left to right order for the coloured wires going into the ignition coil from the ignition pack. Any help at all is very very much appreciated. Thanks Andy

Share this post


Link to post
Share on other sites
Richie-Van-GTi

1.9 8v? Check the afm is plugged in properly as the car wont spark or fuel without it. To check oil pressure warning light just turn ignition on and earth the wires to the block to see which guage goes up. Is it the coil on the inlet manifold?

Share this post


Link to post
Share on other sites
Guest andywillis89
1.9 8v? Check the afm is plugged in properly as the car wont spark or fuel without it. To check oil pressure warning light just turn ignition on and earth the wires to the block to see which guage goes up. Is it the coil on the inlet manifold?

 

yes its the 1.9 8v, sorry but what is the afm? Yes the coil mounted to the inlet manifold.

Share this post


Link to post
Share on other sites
pug_ham
sorry but what is the afm?

Air Flow Meter.

 

You won't get much oil pressure just by cranking it over & once you stop it'll soon drop to zero.

 

Graham.

Share this post


Link to post
Share on other sites
blindreaper242

!this car is shared by me!

 

A specific topic relating to ignition coil wiring has been started by me.

 

Apologies for any confusion.

 

Rich

Share this post


Link to post
Share on other sites
Sign in to follow this  

×