Mikey S 29 1 Cars Posted August 23, 2007 ive just got myself a momo race wheel and am now looking for a suitable boss. i know the boss for the 205, 309 and 405 are the same, but will the boss from a newer pug (ie 206, 106 etc) fit on the 205's column? any help would be mucho appreciated! mike Share this post Link to post Share on other sites
danpug 1 Posted August 23, 2007 Couldn't say for definite but i doubt it as it may foul the dash, i could be wrong though. Share this post Link to post Share on other sites
Baz 421 Posted August 23, 2007 pretty sure the 306, 106, 309, 205 ones are all the same, not sure about any later models though. Share this post Link to post Share on other sites
cybernck 403 1 Cars Posted August 23, 2007 i tried a 306 one in a 106 and it fouled the plastic housing around the boss. Share this post Link to post Share on other sites
hodgy 0 Posted August 26, 2007 the bosses are different between phase 1 and 2! i tried to fit my sparco wheel with my ph2 boss to my ph1 and it doesnt fit so had to buy a new one Share this post Link to post Share on other sites
Richie-Van-GTi 74 2 Cars Posted August 26, 2007 306 boss is too far set back and wide for a 205 column shroud. I know as I have one on my car. I don't use the column shroud though. Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted August 26, 2007 the bosses are different between phase 1 and 2! i tried to fit my sparco wheel with my ph2 boss to my ph1 and it doesnt fit so had to buy a new one I will second that. There are two different part numbers. I may have a new Momo boss on a shelf in the garage Share this post Link to post Share on other sites
Mikey S 29 1 Cars Posted September 5, 2007 I will second that. There are two different part numbers. I may have a new Momo boss on a shelf in the garage thanks for the advice chaps, got my eye on an phase 1.5 boss on the bay at the moment. henry, sent you a message through ebay regarding the momo boss. cheers mike Share this post Link to post Share on other sites
gti_al 1 Posted September 6, 2007 (edited) Definately different... the section of dash i had to hack away confirmed this. It also hits the bit that goes around the instruments on full lock. If anyone wants an as-new phase 1 momo boss let me know. I need a P2 one... anyone? Edited September 6, 2007 by gti_al Share this post Link to post Share on other sites
