Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
oliver17491

Fast Help Please

Recommended Posts

oliver17491

i just need someone with a 1.6 gti or 1.9 to run out to there car and tell me where the 2 plugs go to comming off the coil there should be a 2 and 3 pin connector

 

thanks oli

Share this post


Link to post
Share on other sites
welshpug

3 pin would be for teh dizzy fly lead, mine doesnt have a 2 pin anywhere near the coil though, further down the loom there is a black plug for the SAD and blue plug for the ECU temp sender though.

Share this post


Link to post
Share on other sites
oliver17491

i got a black 3 pin one and a white 2 pin one, the 3 pin one is sealed and has green, red and black wireing going into it and the 2 pin one has brown and blue wires going into it, what does the 2 pin conector do? or go to?

Share this post


Link to post
Share on other sites
pug_ham

Three pin plug is as WelshPug says, for the dizzy fly lead & the white one with a brown & blue wires possible goes to the reversing light switch plug on the gearbox case near the clutch pedal mechanism.

 

Can you see any numbers on the wires near the white plug? If you see #'s 52 & 53 its the reversing light switch plug.

 

Graham.

Share this post


Link to post
Share on other sites
oliver17491

would them numbers be on the plug? if so i cant see any. just relised that them to wires the blue and the brown are linked onto the same termanal. them two wires go into 4,1 on the coil driver or what ever it is called

Share this post


Link to post
Share on other sites
Sign in to follow this  

×