1.6 Xu Gti Engine Early And Later Engines, The Same Or Not?

[oliver17491 0]

hi im just about to put another 1.6 gti engine from another car in my car when i noticed that the wireing looms are different and i was just wondering what would be an easy solutuion to my problem? and im guessing that the engine that im putting in is from a early car and my car is the later version

Edited August 18, 2007 by oliver17491

[Richie-Van-GTi 71 2 Cars]

use existing loom and ecu etc with the new engine, only changes in the engines were compression ratios were lower on later cars for the emissions laws but a higher CR engine will give a later car a nice performance increase, unless its a really early engine, then it has smaller valves and less power IIRC.

[oliver17491 0]

well my car is a G reg and the engine is out of a ..... i honestly cant remeber lol. but i can remember its like a couple of years before, problem is i havnt got the engine loom for my car as the person who i brought it off tryed to fit a mi16 engine but with the 405 that he tryed to mod but it didnt work so he took the engine out and put it in a different car. i was wondering if i got a later engine loom would it fit onto the earlyer engine?

[Miles 331 1 Cars]

Any 8v loom will fit, It;s only the coil wiring and on late models the location of the ign Amp is different,

Phase 1 and 1.5 models are completly different thou (>1988)

[oliver17491 0]

just remembered that the engine is out of a F reg car and my car is a G reg car and i also remebered that the engine runs off a Tachymetric Relay and the later versions dont. are 1.6 and 1.9 looms the same? so your saying if i get a later version engine loom it will fit on my early engine?

[oliver17491 0]

has anyone got a wireing diagram for the coil loom?