richosabroard 0 Posted August 8, 2007 I am trying to remove my front bumper to repair some body damage and can't get the sides to come off.how do you release the side pieces? Share this post Link to post Share on other sites
willxs 0 Posted August 11, 2007 the front bumpers are held on by 4 bolts iirc. the two at the sides are on the inside of the wing. you should have a support bar going from the inside arch to the inner wing which will where the bolt from the bumper goes to. 9/10 there to rusted and break or round off. along with the support bars, they normally fall to pieces to. Share this post Link to post Share on other sites
j_turnell 137 3 Cars Posted August 12, 2007 If they are the original bolts they won't come off, far easier just to drill them off and get a new fixing kit. Share this post Link to post Share on other sites
Rupertfinch 6 Posted August 15, 2007 Check that some lazy bugger hasn't siliconed it. I had this, plus some random screws in several parts of my bumper - lost the bap, then angle grinded it! Very satisfying, but cost me a new bumper, still the old one had gone crappy. Share this post Link to post Share on other sites
