CaptainP 2 Posted August 5, 2007 Hi, my oil pressure gauge has been all over the place for the past couple of weeks. Yesterday I tested the wire from the brown multi-plug to the sender unit and all seems fine. Searching has revealed that it's most likely to be the sender unit itself which is on the blink. It's described as a "mushroom" shaped unit in all the threads I've read today. Can someone take a look at my linked pic and tell me if this is the mushroom type sender as I've heard there maybe a later type of unit which is different? Also what size spanner do I attack it with from the underside? http://i190.photobucket.com/albums/z295/Ca...Ti/IMGP0495.jpg Thanks Steve Share this post Link to post Share on other sites
welshpug 1,657 Posted August 5, 2007 17mm spanner, not sure about any differences, theres one on my 405 but its not plugged in and it looks identical. Share this post Link to post Share on other sites
CaptainP 2 Posted August 6, 2007 Nice, thanks Welsh Pug. Came off a treat Steve Share this post Link to post Share on other sites
