S16 Oil + Water Pipes

[willxs 0]

been searching for teh last 20 minutes as i know there used to be a thread about this where someone made up a picture diagram showing the oil and water pipes (like an idiots guide to) on the 16v engine. Cant find it anymore?

so if anyone has those colourful diagrams or some new ones, would be much appreciated!

 

Cheers, Will

[petert 607]

http://forum.205gtidrivers.com/index.php?s...=0&p=680163

[willxs 0]

yeah ive still got that one peter, cheers.

it was mainly for the water pipes? some one drew it in paint or something.

 

Cheers, Will

[Alastairh 47]

Don't have a diagram, but any specific pipes your unsure of?

[willxs 0]

well, out of that image, pipe 73? comin out the top of the oil filler, and pipe 3?

 

then just most of the water pipes i think

 

using the GTi-6 inlet aswell, not sure how much difference this make? and has the GTi-6 inlet use a different icv/stepper motor? to the S16? magnetti marlli (sp) unit bolted onto the inlet running a pipe to the filter bypasssing the throttle body?

 

Cheers, Will

 

is it your lamda sensor 205 parts are sending me?

Edited July 31, 2007 by willxs

[Alastairh 47]

Not sure about the lamba, i'll speak to Paul, although i do have a 200 mile old one, so we will see.

 

Had a quick look at my old pics that are in my sig

 

And Number 3 that comes from the right of the front of the oil filler housing and mounts on to the Tb pic and the left number 73 pipe goes to your air filter converter pipe to the air filter, via one of those round breather thingys, which you can just about see here.

 

 

Alastair

[willxs 0]

ok cheers.

 

can i just stick a breather on pipe 73 then? as the GTi-6 filter pipe only has 1 hole which is for a pipe to bypass the throttle body and goes into the magnetti mirelli unit? stepper/icv??

 

had a quick look through your pics, think some will come in handy