DaveK 0 Posted July 25, 2007 The oil pressure gauge isnt working, given the terminals a good clean and nothing. Swapped the wire from the guage to the warning sensor and the guage on the dash goes right to the top so the wire is fine. I do have a spare one sitting on an engine but i dont actually need to know the oil pressure unless its fatal (just a road car) but will i still get the warning light and Stop light come on if it does get too low? While i was in that area the alternator wire and warning wires snapped (gid ole french wiring eh) lol so will rewire those with new terminals Cheers, Dave Share this post Link to post Share on other sites
Richie-Van-GTi 71 2 Cars Posted July 25, 2007 stop light is wired independant of oil pressure guage so it will work without the pressure gauge working yes, assuming the stop light sender works. Share this post Link to post Share on other sites
zowow 0 Posted July 25, 2007 for some reason when i connect mine, all the dials shoot right up must have a dodgy earth Share this post Link to post Share on other sites
