Ant 2 Posted July 21, 2007 Yet another 2.0 turbo topic Trying to wire up the oil sensors.. Ive got one sensor just to the side of the alternator. I presume this is the oil presure warning light ? On the back of the 2.0 block there is a screw in sensor, the screws into the block.. .It has 2 wires and is some kind of oil sensor.. Anybody know what this is ? Cheers Share this post Link to post Share on other sites
Exile 0 Posted July 21, 2007 (edited) 1. Yes -warning lamp 2. Probably it is the oil level sensor Edited July 21, 2007 by Exile Share this post Link to post Share on other sites
tom_m 0 Posted July 23, 2007 exile is correct, the one on the back of the block is the oil level sender Share this post Link to post Share on other sites
Ant 2 Posted July 23, 2007 exile is correct, the one on the back of the block is the oil level sender Well mine doesnt send a signal very far - Traced it back yesterday to the loom, and the connection plug between the engine bay loom plug and the plug that leads back into the car ( used the 605 loom ).. the wires goto the plug on the engine bay side, but there arent any connectors on the other side of the loom oe look face on at the plug and its missing the connection metal slots on the connection for those 2 wires Not sure why pug would do this. Share this post Link to post Share on other sites
tom_m 0 Posted July 24, 2007 some cars used it, some didn't, typical french build Share this post Link to post Share on other sites
