Guest Mr-Stoner Posted July 21, 2007 Hello can one of you please help me out In the middle of putting the 205 back together after a rear beam rebuild and it has come to the point where i need the bracket that the rear break pipe joins to from the caliper as the old ones on my old beam kinda had more rust than metal here is picture of the bracket i need or is there another way around this problem http://s3.photobucket.com/albums/y84/DaveT...arbeamswap2.jpg been so long since a drove the 205 Please Help me Cheers Dave Share this post Link to post Share on other sites
Ryan 99 Posted July 21, 2007 Theye were missing from the replacement beam I bought so I had to make my own - just some strips of metal about an inch wide and 3 inches long, twisted through 90 deg in the middle. Share this post Link to post Share on other sites
Guest Mr-Stoner Posted July 21, 2007 Theye were missing from the replacement beam I bought so I had to make my own - just some strips of metal about an inch wide and 3 inches long, twisted through 90 deg in the middle. cheers for the quick reply mate i have the other mounts that go through the rear shockers as it happens time to get the hammer out me thinks Share this post Link to post Share on other sites
Ryan 99 Posted July 21, 2007 Not the best picture, but you can probably see what I mean. I didn't have anything to compare it to so I just made what fits. I think it's bolted into one of the holes for the disc backplates, which I don't have. Share this post Link to post Share on other sites
Guest Mr-Stoner Posted July 23, 2007 Thanx Ryan Jobs all sorted now just My MOt to go fingers crossed Share this post Link to post Share on other sites
skeggyrik 3 Posted July 23, 2007 Don't shear the bolt that holds the mount to the trailing arm and secures disc guards like I did the other day! Most annoying. Got that job to look forward to. They are the only original fixings I've reused so far, typical. It' s broken off about 3mm into the bolt hole so I can't even cut a slot in it to try and wind it out. It will also have to be done on the car as I'm not taking the beam off the car again or pulling it apart! Share this post Link to post Share on other sites
Guest Mr-Stoner Posted July 23, 2007 yeah sound like a nightmare man lucky for me i wont have that problem lovely new rear beam and calipers and the plates that the calipers bolt to phaze one of many complete lol Share this post Link to post Share on other sites
