nunoserrano 0 Posted July 6, 2007 Hi could some one get me a Mi16v base Map for the Haltech E6X ecu ?? thanks Share this post Link to post Share on other sites
petert 587 Posted July 8, 2007 Hi could some one get me a Mi16v base Map for the Haltech E6X ecu ?? thanks Yes, email me. Share this post Link to post Share on other sites
petert 587 Posted July 9, 2007 Here's the an E6X base map for the Mi16. mi16_base_map.zip Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted July 9, 2007 is this MAP or TPS based map? Share this post Link to post Share on other sites
petert 587 Posted July 9, 2007 MAP, with an external 1 Bar MAP sensor. Share this post Link to post Share on other sites
nunoserrano 0 Posted July 10, 2007 Hi petert thanks for the map but once im using TB`s i should need a TPS map right ? Share this post Link to post Share on other sites
petert 587 Posted July 10, 2007 Try this one. It should get you running. I made it from the other one, so the mixtures might be a bit rough in places. mi16_base_TPS.zip Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted July 12, 2007 can someone send me Haltech software then? or perhaps it's easier - a screenshot of fuel and ignition maps (the MAP ones) . thanks. Share this post Link to post Share on other sites
petert 587 Posted July 13, 2007 (edited) can someone send me Haltech software then? And I thought you were an IT guru? http://www.haltech.com.au/downloads.htm Download E6X HalwinX Win, install, then open the first map I posted. You can see the maps in 2D, 3D or text values. Edited July 13, 2007 by petert Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted July 13, 2007 i've given it a quick look last night but couldn't see a download page anywhere. cool, i can now recode it into MegaSquirt , assuming it will work fine with a DFW engine . thanks! Share this post Link to post Share on other sites
karlo 1 Posted July 29, 2007 Just curious, are these maps based on the stock Motronic maps or are they the result of RR mapping? Share this post Link to post Share on other sites
petert 587 Posted July 30, 2007 Just curious, are these maps based on the stock Motronic maps or are they the result of RR mapping? Five years of real life driving and dyno. You'll notice were I tried to richen the fuel maps, around 8ms. The reality was that the std. injectors maxed out. They could have been 10ms and it wouldn't get any richer. Share this post Link to post Share on other sites
karlo 1 Posted July 30, 2007 Man, this is a great contribution to the mi16 community! Are these for a bone stock D6C? How well do you feel that the ignition map is tuned? We've got two 205 mi16s running on Megasquirt already, and the lack of a proper ignition map is the only drawback at the moment. Share this post Link to post Share on other sites
petert 587 Posted July 30, 2007 Are these for a bone stock D6C? How well do you feel that the ignition map is tuned? Bog stock D6C. You could possibly improve the light load ignition mapping with more time on the dyno. Share this post Link to post Share on other sites
karlo 1 Posted July 30, 2007 Marvellous! We may be able to do some RR tuning of this map later on, I'll post back with the modifications if we do. Share this post Link to post Share on other sites
