24seven 104 Posted June 27, 2007 so from cold, start it up, it idles fine for a few seconds the cuts straight out. apparently it doesn't do this once warmed up, but it's not my car and I've not driven it. the owner (brother's GF) took it to a garage and was told the vacuum system needs replaceing . any suggestions what it could be? T reg P3 306. Share this post Link to post Share on other sites
welshpug 1,657 Posted June 27, 2007 XS = 1.6 8v TU, XSi = 2.0 8v or 16v, being phase 2 most likely 16v. idle valve/stepper motor problems are common on them (all engines!), but I havent a clue what they mean by "vacuum system" Share this post Link to post Share on other sites
Sandy 191 Posted June 28, 2007 Could be an air leak. Try another Lambda sensor. Share this post Link to post Share on other sites
24seven 104 Posted June 29, 2007 I'm told it's deffo a 1.8 XS. I'll look into your suggestions. thanks. Share this post Link to post Share on other sites
Richie-Van-GTi 71 2 Cars Posted June 30, 2007 it will be an xsi if its 1.8 16v Share this post Link to post Share on other sites
RossD 44 Posted July 2, 2007 it will be an xsi if its 1.8 16v Nope, the later XS's were 1.8 16v. The earlier ones were TU 1.6 8v. The XSi's are either 2.0 8v (Phase 1) or 2.0 16v (Phase 2 onwards) Share this post Link to post Share on other sites
