matt gti78 0 Posted June 20, 2007 Guys, Just a quick question about the Yamaha R1 Carbs for some of you who have these fitted wouldn't mind answering please. With the R1 Carbs fitted to a Bogg Bro's manifold, does this restrict the bonnet from closing or do you have to modify the bonnet slightly to get it closed. Thanks in advance Matt Share this post Link to post Share on other sites
jonand 0 Posted June 21, 2007 My carbs only just cleared the bonnet with my S16, but the throttle cable was more of a problem as it comes out the top of the carb set up in standard form. I had to cut a section out the bonnet to clear the cable. Jon Share this post Link to post Share on other sites
M_R_205 5 1 Cars Posted June 21, 2007 mine were fine but the huge trupets got in the way a bit lol, you can angle them downwards slightly on the rubers if they point skywards too much Share this post Link to post Share on other sites
matt gti78 0 Posted June 21, 2007 (edited) mine were fine but the huge trupets got in the way a bit lol, you can angle them downwards slightly on the rubers if they point skywards too much With the angle being changed to allow better clearance wouldn't this affect the fuel level in the carbs. Edited June 21, 2007 by matt gti78 Share this post Link to post Share on other sites
M_R_205 5 1 Cars Posted June 22, 2007 With the angle being changed to allow better clearance wouldn't this affect the fuel level in the carbs. if it did affect the fuel level it made no difference to the running of them and it never missfired or cut out, this is how the bogg brothers fitted them, Share this post Link to post Share on other sites
matt gti78 0 Posted June 22, 2007 Excellent, thanks for that. I better go and get myself in the que for ordering my Manifold. Share this post Link to post Share on other sites