Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest moo

Need Help. Part Id

Recommended Posts

Guest moo

sorry if this is in the wrong section. (new to site)

I need help identifying a part. It is a aluminum cylinder 10cm long by 2 in diameter. with 3 wires comming of it. its was found behind the front bumper tie wraped on. reads "Roche et moreau Genevilliers. E1 " on the bottom. there is another component simmiler near the top of the rad just dangling with seemingly no place to go. this had a D1 on it. my best gues is a temp sensor for the automatic chock. the car is a 1991 1.9 gti. also the part is badly croded. where do i look for a new one what eva it is! thanx.

l_6230aeb25ccf32759494cb63fc3bc2be.jpg

l_5957b89860e54fd60bfff42906616efb.jpg

Edited by moo

Share this post


Link to post
Share on other sites
Baz

Either the resistor for the fan, or for the headlights. Do away with it, they're rubbish!

Share this post


Link to post
Share on other sites
Phil H

turn the ignition and the parking lights on and if it gets red hot, it's the dim dip resistor !

Share this post


Link to post
Share on other sites
Guest moo

cheers, now i no what is was looking at its pritty ovious and found plenty of stuff about them.

Edited by moo

Share this post


Link to post
Share on other sites
Super Josh

That has 3 wires on it, so it is the dim-dip resistor. The radiator fan resistor only has 2 wires :rolleyes:

 

 

 

Josh

Share this post


Link to post
Share on other sites
Sign in to follow this  

×