[car_upgrade] My Mi16-conversion Euro-style

[Swazy 0 1 Cars]

My damn MI-engine missfires under load after some seconds it runs nearly normal but it needs its time

if i´m opening the throttle it won´t rev directly

There´s nothing the engine could get some fault air, everything is closed.

 

dizzycap is new, plugs are new, module and coilpack are also new

 

This car is making me ill

 

http://img364.imageshack.us/img364/9008/img020ds2.jpg

Edited March 8, 2008 by cybernck
image filesize way too big!

[cybernck 402 1 Cars]

is it able to rev high when you apply the throttle very slowly?

 

have you got spare Air Flow Meter and Crank Angle Sensor to test with?

 

is your Throttle Position Switch correctly setup (clicks on idle and unclicks when the throttle moves)?

[paul_portsmouth 3]

what are those wheels?

 

 

if its under load is the ignition timing and fuel mixtures set up right?

[Swazy 0 1 Cars]

what are those wheels?

if its under load is the ignition timing and fuel mixtures set up right?

 

these wheels are from RSL Motorsport

 

@cybernck

 

no spare there for afm, but afm works

[paul_portsmouth 3]

how did u get those wheels in a 4x108 it only lists them in 4x100 on thier site

[Swazy 0 1 Cars]

how did u get those wheels in a 4x108 it only lists them in 4x100 on thier site

 

Well, probably they took the 4x108 out of their range?!

take a look at ebay germany, there you can get them i think

 

RSL at ebay germany

 

they say that are the last 5 wheels in 4x108

Edited March 9, 2008 by Swazy

[Swazy 0 1 Cars]

is it able to rev high when you apply the throttle very slowly?

 

is your Throttle Position Switch correctly setup (clicks on idle and unclicks when the throttle moves)?

 

If i apply the throttle very slow the engine will rev higher but very very slow. If i hold the throttle position at its point, the engine revs quicker ?!

[Swazy 0 1 Cars]

If i apply the throttle very slow the engine will rev higher but very very slow. If i hold the throttle position at its point, the engine revs quicker ?!

 

New pics at my imageshack-site, take a look and leave comments :)

[Swazy 0 1 Cars]

Quick question. Could somebody tell me wich injectors will be best for my xu9j4 mi16? i think i need new ones

[cybernck 402 1 Cars]

well that's pretty obvious really... new or refurbed XU9J4 injectors.

[Swazy 0 1 Cars]

well that's pretty obvious really... new or refurbed XU9J4 injectors.

 

Ah ok, i thought there will be something better from aftermarket. But ok

Thanks a lot

[Swazy 0 1 Cars]

Ah ok, i thought there will be something better from aftermarket. But ok

Thanks a lot

 

New parts for my exhaust system has arrived, all stainless steel

 

 

[kyepan 291]

If i apply the throttle very slow the engine will rev higher but very very slow. If i hold the throttle position at its point, the engine revs quicker ?!

 

have you seen the caps program on the xu servicing forum sticky, might be worth checking that the AFM is sending the correct voltage signals, it can easily be back probed with a multi meter, takes 5 mins and an assistant to hold the revs at a particular point.

[cybernck 402 1 Cars]

ooh, nice, Simons is a popular brand in Holland too from what i've seen .

 

out of interest, how much do the manifold and middle box cost?

[Swazy 0 1 Cars]

ooh, nice, Simons is a popular brand in Holland too from what i've seen .

 

out of interest, how much do the manifold and middle box cost?

 

Well the manifold came from Terantex aka boeseturbo and cost me ´bout 700 euros, the middle box cost ´bout 100 euros

[Swazy 0 1 Cars]

Well, after i wasn´t able to get the Compo TH Mono street legal here in germany is was searching for something looklike and found these here:

 

 

This pic is taken from the web, mine are silver sprayed.

After i took of the silver paint, this yellow with the letters came out as you can see on the pic.

But i´ll polish them cause it will match better to the car i think.

[Swazy 0 1 Cars]

Not so easy to get off the paint of the wheels as i thought.

 

This is how they looked as i get them:

 

 

After 5 hours one!! looked like this, nearly ready to get polished

 

 

Not so great looking like the th mono´s but nice, what you guys think?

 

And of course, a new caliper in the back was a must

 

Edited September 13, 2008 by Swazy

[Swazy 0 1 Cars]

I decided to bring my car to a friend, he´ll install a vems ecu, tb´s, finish the exhaust system and do they fine adjustment on rolling road.

 

So i hope the engine will run properly when i get back the car

 

Interior will be finished in some days, seats in etc, pictures will follow, has to tell my friend to do some.

 

Wish me luck that the car will go like it should do

[Swazy 0 1 Cars]

4 days left till we get the car 750 km to hamburg, my friend Jan is already waiting.

The the car will get a new MS2 ecu and set up on rolling road

 

I´m a bit nervous about it, i hope the car will run properly after the session, it will takes about 2 weeks

 

Jan will finish also the exhaust system

[Swazy 0 1 Cars]

Well, finally i´m back at home. We did over 1500 km in 24 hours to bring the car to Jan.

It was a nice trip as well, but a lot of km

 

It wasn´t easy to get the car on the trailer cause the car was too low

 

 

Finally we did it

 

 

 

 

 

 

[Swazy 0 1 Cars]

Not so easy to get off the paint of the wheels as i thought.

 

This is how they looked as i get them:

 

 

After 5 hours one!! looked like this, nearly ready to get polished

 

 

Not so great looking like the th mono´s but nice, what you guys think?

 

After some weeks the wheels are finished, not chromed and not polished, they are high polished consolidated

 

 

 

Lovely

[Swazy 0 1 Cars]

My friend Jan has finshed the exhaust system yesterday, looks great i think.

 

Nearly every part came from TT Turbo, his own company. All stainless steel with a 4-1 exhaust manifold.

 

Fits excellent this backbox from Devil France

 

 

 

 

[Swazy 0 1 Cars]

Nice wheels right?

 

 

[Gentrix 2 1 Cars]

need to see them on the car, but looks very promising so far.

 

 

 

 

andi

[Swazy 0 1 Cars]

need to see them on the car, but looks very promising so far.

 

 

 

 

andi

 

Stimmt, sieht wirklich vielversprechend aus